Aeon Labs Aeotec Z-Wave Plus Door/Window Sensor 6 - Model ZW112

Aeon Labs Aeotec Z-Wave Plus Door/Window Sensor 6 - Model ZW112
Click To Enlarge
  • Item #: 112200
  • Manufacturer: Aeon Labs
  • Manufacturer's Product Number: ZW112-A
  • Condition: New
  • Battery Life: 6 months on full charge
  • Recharging Jack: Micro USB port, 5VDC ±0.5V, max 1A
  • Z-Wave Chip: 500 Series Z-Wave PLUS
  • DC Voltage: Rechargeable Lithium battery, 3.7 V, 500mAh
  • Color: White
  • Packaging: OEM Packaging, Retail Box
  • Operating Temperature Range: 32-104° F (0-40° C)
  • Indoor/Outdoor use: IP20 Indoor use only
  • Range: Up to 492 feet (150 m) outdoors
  • Signal (Frequency): Z-Wave 908.42 MHz
  • Supports Z-Wave AES-128 Security S0: Yes
  • Supports Z-Wave Network Security: Yes
  • Z-Wave Repeater: No
  • Beaming Supported?: No
  * Marked fields are required.
Qty*
Price $49.99
Availability In-Stock

Ultra-Thin, Paintable Z-Wave Plus Door/Window Sensor

Monitor the open/closed status of a door, window, cabinet, safe, or any other open/close object with the Aeon Labs Aeotec Z-Wave Door/Window Sensor 6. The uniquely designed, ultra-thin sensor not only offers a super low profile, it can also be painted to blend into the object you're monitoring, becoming nearly invisible. With Z-Wave Plus certification, the sensor is compatible with all major Z-Wave hubs and controllers.

  • Ultra-thin profile at only 0.35 inch thick
  • "Z-Wave Plus" certified for wide compatibility
  • Sensor may be painted to match the monitored object
  • Receives over-the-air firmware updates
  • Uses AES-128 wireless data encryption to stay secure

The door/window sensor consists of three components: the main sensor, which mounts onto the door/window itself, and two small magnets, which mount onto the frame or in the crack of the door/window. When the sensor is separated from the magnets and/or joined again, the sensor sends a Z-Wave signal to your Z-Wave network. (The size of Magnet 2 is a little larger than Magnet 1, so the magnetism of Magnet 2 is stronger than the Magnet 1.)

The sensor mounts with the included screws or double-sided tape. Each magnet mounts with double-sided tape. The battery-powered sensor comes with a rechargeable battery that lasts up to 6 months. When the battery is low, simply recharge it by plugging it in with the included USB cable.

Contents

  • Z-Wave Door/Window Sensor 6
  • Back Mounting Plate
  • (2) Magnets
  • (2) Pieces of Double-Sided Tape
  • (3) Screws
  • USB Cable

 

Z-Wave Plus Certification

Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the "Next Gen" Z-Wave hardware platform, also know as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.

Z-Wave Plus Logo

 

Downloads

Aeon Labs Door/Window Sensor 6

Model ZW112 - User Manual PDF

(opens in new window)

Aeon Labs Door/Window Sensor 6

Model ZW112 - Spec Sheet PDF

(opens in new window)

Download Lutron User manual Download ZigBee Module User manual

 

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review