GoControl Z-Wave 3-Way (Virtual) On/Off Switch Kit

GoControl Z-Wave 3-Way (Virtual) On/Off Switch Kit
Click To Enlarge
  • Item #: 112176
  • Manufacturer: GoControl
  • Manufacturer's Product Number: WS15Z-1
  • Condition: New
  • Firmware Version;: Z-Wave Version 5.41
  • Dimming Capable: No Dimming (On/Off only)
  • Color Options Available (Yes/No): Yes, Replaceable Colored Trim Rings available
  • AC Voltage: 120 VAC, 60 Hz
  • Controllable Loads: CFL, LED, Xenon, Halogen, Fluorescent, Incandescent, Ceiling Fans and other Motor loads
  • Scene Capable: Yes
  • Max Wattage (Incandescent): 960 Watts (Total)
  • Indoor/Outdoor use: Indoor use only
  • Range: 100 feet Max line of sight between Wireless Controller and closest receiver module
  • Direct Associations Supported?: No, except with Accessory switch WT00Z-1
  • Network Inclusion: Yes
  • Security Compatible: Yes
  • Signal (Frequency): 908.42 MHz
  • Neutral Required: Yes
Price $65.98
Availability Out-of-Stock

The GoControl Z-Wave 3-Way On/Off Switch Kit includes one primary or master on/off relay switch (load bearing) and one accessory switch (non-load bearing aka remote/slave) to allow control of one light from two different locations.  Each switch replaces your current 3-way light switch, so you can use your existing wiring (neutrals are required) and provide Z-Wave wireless and manual control of overhead lighting from multiple locations.

The primary or master on/off switch is the GoControl Model WS15Z-1 On/Off Relay Switch which includes an LED indicator light to easily locate the switch in a dark room. The accessory or slave switch is a GoControl Model WT00Z-1 Accessory Switch.

Please note: A Primary Z-Wave controller (sold separately) is necessary to set up the association between the primary and the accessory switch.  Line (Hot) and Neutral wires are required at the accessory (WT00Z) switchbox and Line, Neutral and Load wires are required at the primary (WS15Z) switchbox.

This is known as a "virtual" 3-way so no load connection is necessary at the remote location, nor is a physical traveler wire required between the two.

Once connected to the load bearing switch, your lights can be turned on or off with a Z-Wave controller up to 100 feet away within line of site. The On/Off switch kit integrates with other Z-Wave enabled products via your Z-Wave controller, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

This kit is the ideal setup for lighting stairs, halls, and multi-entrance rooms.

Replaceable Colored Trim Ring Kits are available, allowing the user to easily change the color of the device with Trim Ring Kits (sold separately) available in Black, Brown & Lt. Almond, as below...

Standard white decora Wallplates are included in each box for each model.

 

On/Off Relay Switch (Primary WS15Z) Color Trim Kits

Accessory Switch (WT00Z) Color Trim Kits

(Sold Separately)

Linear Switch Color Trim Kit (Almond) - Model WTWSKIT-AL Linear Switch Color Trim Kit (Brown) - Model WTWSKIT-BR

Linear Switch Color Trim Kit (Black) - Model WTWSKIT-BK

 

Downloads

GoControl Z-Wave On/Off Relay Switch

Model WS15Z - User Manual PDF

(opens in new window)

GoControl Z-Wave Accessory Switch

Model WT00Z - User Manual PDF

(opens in new window)

Download GoControl Z-Wave On/Off Relay Switch - User Manual PDF  Download GoControl Z-Wave Accessory Switch - User Manual PDF

 

Best Values

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review