GoControl Z-Wave LED/CFL 3-Way (Virtual) Dimmer Switch Kit

GoControl Z-Wave LED/CFL 3-Way (Virtual) Dimmer Switch Kit
Click To Enlarge
  • Item #: 112161
  • Manufacturer: GoControl
  • Manufacturer's Product Number: WD500Z-1, WT00Z-1
  • Condition: New
  • Firmware Version;: Z-Wave Version 4.55
  • Dimming Capable: Yes
  • Color Options Available (Yes/No): Yes, Replaceable Colored Trim Rings available
  • AC Voltage: 120 VAC, 60 Hz
  • Controllable Loads: Dimmable LED's & CFL's, Incandescent and Halogen lights
  • Scene Capable: Yes
  • Max Wattage (Incandescent): 500 Watts (Total)
  • Indoor/Outdoor use: Indoor use only
  • Range: 100 feet Max line of sight between Wireless Controller and closest receiver module
  • Direct Associations Supported?: No, except with Accessory switch WT00Z-1
  • Network Inclusion: Yes
  • Security Compatible: Yes
  • Signal (Frequency): 908.42 MHz
  • Neutral Required: Yes
Price $65.98
Availability Out-of-Stock

The GoControl Z-Wave LED/CFL 3-Way Dimmer Switch Kit includes one primary or master dimmer switch (load bearing) and one accessory switch (non-load bearing aka remote/slave) to allow control of one light from two different locations.  Each switch replaces your current 3-way light switch, so you can use your existing wiring (neutrals are required) and provide Z-Wave wireless and manual control of overhead lighting from multiple locations.

The primary or master dimmer switch is the GoControl Model WD500Z-1 Dimmer Switch which includes an LED indicator light to easily locate the switch in a dark room. The accessory or slave switch is a GoControl Model WT00Z-1 Accessory Switch.

Please note: A Primary Z-Wave controller (sold separately) is necessary to set up the association between the primary and the accessory switch.  Line (Hot) and Neutral wires are required at the accessory (WT00Z) switchbox and Line, Neutral and Load wires are required at the primary (WD500Z) switchbox.

This is known as a "virtual" 3-way so no load connection is necessary at the remote location, nor is a physical traveler wire required between the two.

Once connected to the load bearing switch, your lights can be turned on/off and dimmed with a Z-Wave controller up to 100 feet away within line of site. The Dimmer switch kit integrates with other Z-Wave enabled products via your Z-Wave controller, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

This kit is the ideal setup for lighting stairs, halls, and multi-entrance rooms.

Replaceable Colored Trim Ring Kits are available, allowing the user to easily change the color of the device with Trim Ring Kits (sold separately) available in Black, Brown & Lt. Almond.  A different color trim ring kit is required for both the WD500Z and the WT00Z, as below...

Standard white decora Wallplates are included in each box for each model.

 

Dimmer Switch (Primary WD500Z) Color Trim Kits

(Sold Separately)

Linear Dimmer Switch Color Trim Kit (Almond) - Model WDKIT-AL Linear Dimmer Switch Color Trim Kit (Brown) - Model WDKIT-BR

Linear Dimmer Switch Color Trim Kit (Black) - Model WDKIT-BK

 

Accessory Switch (WT00Z) Color Trim Kits

(Sold Separately)

Linear Switch Color Trim Kit (Almond) - Model WTWSKIT-AL Linear Switch Color Trim Kit (Brown) - Model WTWSKIT-BR

Linear Switch Color Trim Kit (Black) - Model WTWSKIT-BK

 

Downloads

GoControl Z-Wave LED/CFL Dimmer

Model WD500Z - User Manual PDF

(opens in new window)

GoControl Z-Wave LED/CFL Dimmer

Model WT00Z - User Manual PDF

(opens in new window)

Download GoControl Z-Wave LED/CFL Dimmer - User Manual PDF  Download GoControl Z-Wave Accessory Switch - User Manual PDF

Save

Best Values

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review