GoControl Z-Wave Plug-in Appliance Module - Model PS15Z-2

GoControl Z-Wave Plug-in Appliance Module - Model PS15Z-2
Click To Enlarge
  • Item #: 11292
  • Manufacturer: GoControl
  • Manufacturer's Product Number: PS15Z-2
  • Condition: New
  • Firmware Version;: Z-Wave Version 5.41
  • Dimming Capable: No Dimming (On/Off only)
  • AC Voltage: 120 VAC, 60 Hz
  • Controllable Loads: Incandescent, Halogen, High Wattage Flood Lights, CFL, Fluorescent, Low Voltage Transfomers, Ceiling Fans, Pumps/Motors and Appliances
  • Scene Capable: Yes
  • Max Wattage (Incandescent): 300 Watts Incandescent
  • Motor Load: 1/2 HP
  • Resistive Load: 15A (1800 Watts)
  • Indoor/Outdoor use: Indoor use only
  • Range: 100 feet Max line of sight between Wireless Controller and closest receiver module
  • Network Inclusion: Yes
  • Security Compatible: Yes
  • Signal (Frequency): 908.42 MHz
Price $35.99
Availability Out-of-Stock

The GoControl PS15Z-2 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load. The PS15Z-2 module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module. Once connected, the appliance /device can be turned on or off remotely via the Z-Wave controller.

This plug-in Appliance Module integrates with other GoControl Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

The PS15Z-2 supports the Protection Command:

The PS15Z-2 can be set to any 1 of 3 Protection modes by a wireless controller. Refer to your controller for information on how to set the
various modes of Protection. Some controllers may only be able to set certain settings of Protection:

There are 3 modes of Protection and they are the following:

  1. No protection
  2. Child protection
  3. Local Button totally disabled

When Protection is set to “No Protection” mode, the PS15Z-2 works normally, unit will turn on and off with the button on the unit, or with the
wireless controller. When Protection is set to “Child Protection” mode, you are required to press the button on the unit 3 times rapidly to control the attached load. The PS15Z-2 continues to operate normally using a wireless controller. When Protection is set to “Button totally disabled” mode the button will not work to turn the unit on or off. The button can still be used, however, to access the Z-Wave network. The PS15Z-2 continues to
operate normally using a wireless controller.

 

Downloads

 

GoControl Z-Wave Plug-in Appliance Module

Model PS15Z-2 - User Manual PDF

(opens in new window)

GoControl Z-Wave Smart Home

Connected Products Brochure PDF

(opens in new window)

Download GoControl Z-Wave Plug-in Appliance Module  Model PS15Z-2 - User Manual PDF  Download GoControl Z-Wave Smart Home Connected Products Brochure PDF

 

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review