X-10 Hardwired 3-Way Wall Switch Dimming Kit - Model WS4777
- Item #: 11142
- Manufacturer: X-10 Pro USA
- Manufacturer's Product Number: WS4777
- Condition: New
- Dimming Capable: Yes
- Color: White
- AC Voltage: 120 VAC, 60 Hz
- Controllable Loads: Incandescent, Halogen lights
- Max Wattage (Incandescent): 500 Watts
- Indoor/Outdoor use: Indoor use only
Automate your lights, remotely control them & make them dimmable!
The X10 Model WS4777 3-Way Wall Switch can maintain local control of lights wired into it, while still having the ability to respond to X10 commands via X10 controllers or wireless remotes. Dim and Bright commands are supported remotely from X-10 controllers and/or remotes.
The WS4777 Wall Switch is very easy to set up and install - no neutral is required. Existing three-way wall switches are easy to replace with the WS4777 X10 Wall Switch Module. Just remove the old switch, connect the line and load wires inside the box to the line and load wires on the WS4777, connect the traveler wire from the existing 3-way to the master switch included in this kit, wire in the included slave switch at the second, slave box location and thats it! To set up, simply set the house code and unit code dials to the same letter and number as the X10 controller used to controll the switch, and the it is ready to use.
These easy to use wire-in modules respond to ON/OFF, DIM/BRIGHT, ALL LIGHTS ON, and ALL OFF commands from any X10 wireless remote or controller. The WS4777 can allow local control of lights using On/Off commands, however local Dim and Bright commands can only be sent remotely via the powerline or wirelessly when used with an X-10 Transceiver (sold seperately).
The WS4777 is designed with a push button switch, so if desired, it can be used as a direct replacement for existing toggle type switches in your home, without needing to replace all of the old toggle type wallplates.
Indoor and outdoor fixtures connected to this switch can also be turned On or Off locally and by X10 controllers. The versatility of the WS4777 Switch makes it ideal for any bedroom, living room or any room in your home. Rated at 120 Volts AC. UL Listed. Up to 500 Watts maximum. For Incandescent use only - Do not use for appliances, low voltage lamps or fluorescent lamps.