X-10 PRO Dimmable Wall Switch Module - Model PLW01 (White)
- Item #: 11147
- Manufacturer: X-10 Pro USA
- Manufacturer's Product Number: PLW01
- Condition: New
- Dimming Capable: Yes
- Color: White
- AC Voltage: 120 VAC, 60 Hz
- Controllable Loads: Incandescent, Halogen lights
- Max Wattage (Incandescent): 500 Watts
- Indoor/Outdoor use: Indoor use only
Automate your lights, remotely control them & make them dimmable!
The X10 PRO Model PLW01 Wall Switch can maintain local control of lights wired into it, while still having the ability to respond to X10 commands via X10 controllers or wireless remotes. Dim and Bright commands are supported remotely from X-10 controllers and/or remotes.
The PLW01 Wall Switch is very easy to set up and install. Existing single pole, 2 wire wall switches are easy to replace with the PLW01 X10 Wall Switch Module. Just remove the old switch, connect the two wires inside the box to the two wires on the PLW01 and thats it! To set up, simply set the house code and unit code dials to the same letter and number as the X10 controller used to controll the switch, and the switch is ready to use.
These easy to use wire-in modules respond to ON/OFF, DIM/BRIGHT, ALL LIGHTS ON, and ALL OFF commands from any X10 wireless remote or controller. The PLW01 can allow local control of lights using On/Off/DIM/BRIGHT commands.
The PLW01 is designed with a push button switch, so if desired, it can be used as a direct replacement for existing toggle type switches in your home, without needing to replace all of the old toggle type wallplates.
Indoor and outdoor fixtures connected to this switch can also be turned On or Off locally and by X10 controllers. The versatility of the PLW01 Switch makes it ideal for any bedroom, living room or any room in your home. Rated at 120 Volts AC. UL Listed. Up to 500 Watts maximum. For Incandescent use only - Do not use for appliances, low voltage lamps or fluorescent lamps.