X-10 Powerhouse Lamp Module - Model LM465
- Item #: 11111
- Manufacturer: X-10 Pro USA
- Manufacturer's Product Number: LM465
- Condition: New
- Color: White
- AC Voltage: 120VAC
- Controllable Loads: Incandescent Only
- Min/Max Wattage: 300 Watts Maximum
The X10 Lamp Module is the simplest and most effective way to control your household incandescent lights. Lighting control is simply a plug-in away. The X10 Lamp Module plugs into any standard 120V household outlet and gives you the ability to remotely control any incandescent light you plug into the module (up to 300 watts). The LM465 Lamp Module is actually a Receiver that responds to X10 Signals generated by X10 controllers elsewhere on the electrical power lines. Simply dial in any House Code and Unit Code you choose for each module and away you go!
Don't worry about losing manual control of the lamp...it will function normally even with the Module in place due to the "load sense" feature which gives it the ability to "sense" if any load is plugged into it. When the lamp on/off switch is toggled to the On position, the Module responds by turning ON the lamp connected to it
The LM465 is also a Non-AGC device so it has greater sensitivity to the X10 Command Signal in an installation where electronic interference is low.
Please note: X10 Lamp Modules should not be used with fluorescent or low voltage lamps. Use Appliance Modules such as a model AM466 from X-10 Powerhouse or a model PAM02 from X-10 Pro if control over Fluorescent lights is required.
Downloads: LM465 Product Manual PDF