X-10 Wall Mounted Transmitter Base Controller - Model XPT-NS
- Item #: 11120
- Manufacturer: X-10 Pro USA
- Manufacturer's Product Number: XPT-NS
- Condition: New
- Dimming Capable: Yes
- AC Voltage: 120 VAC, 60 Hz
The XPT is a Wall Mounted X10 Controller / Transmitter that is capable of sending X-10 signals to any X-10 powerline receiver. The XPT Base Unit utilizes 7 different multi-button Keypads (sold separately) to send X10 Commands (over existing power wires) to include: ON / OFF / Brighten / Dim / All Lights ON / All Units OFF. The XPT is mounted into a standard single-gang wall box and the Keypads are plugged onto the face of the base unit.
The XPT Base Unit is wired to HOT and Neutral, no other wires are required. The XPT with any of 7 Keypads can control any X10 Receiver Modules.
Unit Number Addresses run in Sequential Order ascending up from the set Number Dial Address. (I.E. - Dials set to A1, next button is A2, A3 and A4 in accordance with the Keypad used). Individual Keypads come in White or Ivory.
Additonal Products Required;
- For use with one of 7 available multi-button Keypads which transmit X-10 commands (over existing power lines) including On/Off/Dim/Bright/All Lights On/All Lights Off depending upon which keypad is attached to the XPT-NS Base.
- Keypads sold separately